Enumeration data types

ArrowType(cls, value[, names, module, ...])	Options for the type of arrow to be created for directions in the ply geometry export.
BaseElementMaterialHandling(cls, value[, ...])	Determines how the base material is handled where it intersects with a reinforcing element.
BooleanOperationType(cls, value[, names, ...])	Options for combining selection rules.
CutOffGeometryOrientationType(cls, value[, ...])	Determines the orientation of a cut-off geometry.
CutOffMaterialHandling(cls, value[, names, ...])	Options for how cut-off material is selected.
CutOffRuleType(cls, value[, names, module, ...])	Options for how a cut off rule is defined.
DrapingMaterialModel(cls, value[, names, ...])	Options for the material type used in the draping algorithm.
DrapingType(cls, value[, names, module, ...])	Options for the draping algorithm used.
DropOffMaterialHandling(cls, value[, names, ...])	Options for how drop-off material is selected.
DropOffType(cls, value[, names, module, ...])	Determines whether the drop off in solid models is inside or outside the ply boundary.
EdgeSetType(cls, value[, names, module, ...])	Options for how an edge set is defined.
ElementalDataType(cls, value[, names, ...])	Options for the type of per-element data.
ElementTechnology(cls, value[, names, ...])	Options for the element technology used in a layup mapping object.
ExtrusionGuideType(cls, value[, names, ...])	Extrusion guide type used in an extrusion guide (solid model).
ExtrusionMethod(cls, value[, names, module, ...])	Extrusion method used in a solid model.
ExtrusionType(cls, value[, names, module, ...])	Extrusion method used in a section cut.
FeFormat(cls, value[, names, module, ...])	Options for the format of the FE file.
GeometricalRuleType(cls, value[, names, ...])	Options for how a geometrical selection rule is defined.
HDF5CompositeCAEImportMode(cls, value[, ...])	Options for the import mode of the HDF5 Composite CAE file.
HDF5CompositeCAEProjectionMode(cls, value[, ...])	Options for the projection mode of the HDF5 Composite CAE file.
IgnorableEntity(cls, value[, names, module, ...])	Options for the entities to ignore when loading an FE file.
ImportedPlyDrapingType(cls, value[, names, ...])	Options for the draping algorithm used.
ImportedPlyOffsetType(cls, value[, names, ...])	Options for the definition of the offset.
ImportedPlyThicknessType(cls, value[, ...])	Options for how ply thickness is defined.
IntersectionType(cls, value[, names, ...])	Determines how the intersection is computed for wireframe section cuts.
LayupMappingRosetteSelectionMethod(cls, value)	Options for how the rosette is selected in the layup mapping.
LinkedObjectHandling(cls, value[, names, ...])	Defines options for handling linked objects when copying a tree of ACP objects.
LookUpTable3DInterpolationAlgorithm(cls, value)	Options for the interpolation algorithm used for 3D look-up tables.
LookUpTableColumnValueType(cls, value[, ...])	Options for the column type (data location, scalar data, directional data) of look-up table columns.
MeshImportType(cls, value[, names, module, ...])	Options for the definition of the source of the imported mesh.
NodalDataType(cls, value[, names, module, ...])	Options for the type of per-node data.
OffsetType(cls, value[, names, module, ...])	Options for the ply offset type.
PhysicalDimension(cls, value[, names, ...])	Options for the dimension (time, length, currency, ...) of data.
PlyCutOffType(cls, value[, names, module, ...])	Options for how ply cut-off is computed.
PlyGeometryExportFormat(cls, value[, names, ...])	Options for the file format of the ply geometry export.
PlyType(cls, value[, names, module, ...])	Options for the material type of a ply.
ReinforcingBehavior(cls, value[, names, ...])	Specifies whether the reinforcing elements carry tension and compression load, or only one of them.
RosetteSelectionMethod(cls, value[, names, ...])	Options for how the rosette is selected in oriented selection sets.
RosetteType(cls, value[, names, module, ...])	Options for the type of a rosette.
SectionCutType(cls, value[, names, module, ...])	Determines whether the section cut is extruded by modeling ply, production ply, or analysis ply.
SectionCutCDBExportType(cls, value[, names, ...])	Determines the type of section cut model to be exported to ANSYS Mechanical APDL.
SensorType(cls, value[, names, module, ...])	Options for the type of sensor.
SnapToGeometryOrientationType(cls, value[, ...])	Determines which layup face a snap-to geometry is applies to.
SolidModelExportFormat(cls, value[, names, ...])	Options for the export format of solid models.
SolidModelImportFormat(cls, value[, names, ...])	Options for the file format when importing a solid model.
SolidModelOffsetDirectionType(cls, value[, ...])	Determines how the offset direction is evaluated in a solid model.
SolidModelSkinExportFormat(cls, value[, ...])	Options for the export format of solid model skins.
Status(cls, value[, names, module, ...])	Options for the update status of an object.
StressStateType(cls, value[, names, module, ...])	Specifies if the reinforcing elements should behave like a link, membrane, or shell element (with or without bending).
SymmetryType(cls, value[, names, module, ...])	Options for the symmetry of stackups or sublaminates.
ThicknessFieldType(cls, value[, names, ...])	Options for how thickness from a table is defined.
ThicknessType(cls, value[, names, module, ...])	Options for how ply thickness is defined.
UnitSystemType(cls, value[, names, module, ...])	Available choices for the unit system.
VirtualGeometryDimension(cls, value[, ...])	Options for the dimension of a virtual geometry.